Ultrasoft platelet-like particles stop bleeding in rodent and porcine models of trauma.

Uncontrolled bleeding after trauma represents a substantial clinical problem. The current standard of care to treat bleeding after trauma is transfusion of blood products including platelets; however, donated platelets have a short shelf life, are in limited supply, and carry immunogenicity and contamination risks. Consequently, there is a critical need to develop hemostatic platelet alternatives. To this end, we developed synthetic platelet-like particles (PLPs), formulated by functionalizing highly deformable microgel particles composed of ultralow cross-linked poly (N-isopropylacrylamide) with fibrin-binding ligands. The fibrin-binding ligand was designed to target to wound sites, and the cross-linking of fibrin polymers was designed to enhance clot formation. The ultralow cross-linking of the microgels allows the particles to undergo large shape changes that mimic platelet shape change after activation; when coupled to fibrin-binding ligands, this shape change facilitates clot retraction, which in turn can enhance clot stability and contribute to healing. Given these features, we hypothesized that synthetic PLPs could enhance clotting in trauma models and promote healing after clotting. We first assessed PLP activity in vitro and found that PLPs selectively bound fibrin and enhanced clot formation. In murine and porcine models of traumatic injury, PLPs reduced bleeding and facilitated healing of injured tissue in both prophylactic and immediate treatment settings. We determined through biodistribution experiments that PLPs were renally cleared, possibly enabled by ultrasoft particle properties. The performance of synthetic PLPs in the preclinical studies shown here supports future translational investigation of these hemostatic therapeutics in a trauma setting.

Enhancing Adhesion of Fibrin-Based Hydrogel to Polythioether Polymer Surfaces.

The development of stable (bio)hybrid constructs composed of scaffolds and (bio)matrices is a major challenge in the field of tissue engineering. In the present work, the adhesion of fibrin-based hydrogels to the surface of polythioether-based polymers relevant to the 3D printing of polymer scaffolds produced by thiol-ene click chemistry was investigated. Adhesion properties were characterized by single-lap tensile shear testing. Both the sample preparation and the test method were optimized for the analysis of fibrin gel bonding to the polythioether surface. Our experimental results show that even without further modification, an adhesion between the fibrin hydrogel and polythioether is substantial, with an adhesion strength of 4.9 ± 1.0 kPa. To further improve the bonding, linear functional poly(N-vinylpyrrolidone-co-glycidyl methacrylate) (PVP-co-GMA) copolymers were used that are known for covalently binding to fibrin. The maximum adhesion strength in our study was found to be 18.4 ± 3.4 kPa. The pure PVP-co-GMA copolymers also demonstrate covalent binding to the thiol-ene-based polymers with a maximum adhesion strength of 32.2 ± 2.7 kPa. Therefore, compared to pure fibrin, the presence of copolymer coating both on the polythioether surface and in the fibrin gel led to a significant increase of the adhesion strength by a factor of 1.6.

Fibrin clot fracture under cyclic fatigue and variable rate loading.

Fibrin clot is a vital class of fibrous materials, governing the mechanical response of blood clots. Fracture behavior of fibrin clots under complex physiological load is relevant for hemostasis and thrombosis. But how they fracture under cyclic and variable rate loading has not been reported. Here we conduct cyclic fatigue and monotonic variable rate loading tests on fibrin clots to characterize their fracture properties in terms of fatigue threshold and rate-dependent fracture toughness. We demonstrate that the fracture behavior of fibrin clots is sensitive to the amplitude of cyclic load and the loading rate. The cyclic fatigue tests show the fatigue threshold of fibrin clots at 1.66 J/m2, compared to the overall fracture toughness 15.8 J/m2. Furthermore, we rationalize the fatigue threshold using a semi-empirical model parameterized by 3D morphometric quantification to account for the hierarchical molecular structure of fibrin fibers. The variable loading tests reveal rate dependence of the overall fracture toughness of fibrin clots. Our analysis with a viscoelastic fracture model suggests the viscoelastic origin of the rate-dependent fracture toughness. The toughening mechanism of fibrin clots is further compared with biological tissues and hydrogels. This study advances the understanding and modeling of fatigue and fracture of blood clots and would motivate further investigation on the mechanics of fibrous materials. STATEMENT OF SIGNIFICANCE: Fibrin clot is a soft fibrous gel, exhibiting nonlinear mechanical responses under complex physiological loads. It is the main load-bearing constituent of blood clots where red blood cells, platelets and other cells are trapped. How the fibrin clot fractures under complex mechanical loads is critical for hemostasis and thrombosis. We study the fracture behavior of fibrin clots under cyclic fatigue and monotonic variable rate loads. We characterize the fatigue-threshold and viscous energy dissipation of fibrin clots. We compare the toughness enhancement of fibrin clots with hydrogels. The findings offer new insights into the fatigue and fracture of blood clots and fibrous materials, which could improve design guidelines for bioengineered materials.

Comprehensive Analysis of the Role of Fibrinogen and Thrombin in Clot Formation and Structure for Plasma and Purified Fibrinogen.

Altered properties of fibrin clots have been associated with bleeding and thrombotic disorders, including hemophilia or trauma and heart attack or stroke. Clotting factors, such as thrombin and tissue factor, or blood plasma proteins, such as fibrinogen, play critical roles in fibrin network polymerization. The concentrations and combinations of these proteins affect the structure and stability of clots, which can lead to downstream complications. The present work includes clots made from plasma and purified fibrinogen and shows how varying fibrinogen and activation factor concentrations affect the fibrin properties under both conditions. We used a combination of scanning electron microscopy, confocal microscopy, and turbidimetry to analyze clot/fiber structure and polymerization. We quantified the structural and polymerization features and found similar trends with increasing/decreasing fibrinogen and thrombin concentrations for both purified fibrinogen and plasma clots. Using our compiled results, we were able to generate multiple linear regressions that predict structural and polymerization features using various fibrinogen and clotting agent concentrations. This study provides an analysis of structural and polymerization features of clots made with purified fibrinogen or plasma at various fibrinogen and clotting agent concentrations. Our results could be utilized to aid in interpreting results, designing future experiments, or developing relevant mathematical models.

Pre-cultured, cell-encapsulating fibrin microbeads for the vascularization of ischemic tissues.

There is a significant clinical need to develop effective vascularization strategies for tissue engineering and the treatment of ischemic pathologies. In patients afflicted with critical limb ischemia, comorbidities may limit common revascularization strategies. Cell-encapsulating modular microbeads possess a variety of advantageous properties, including the ability to support prevascularization in vitro while retaining the ability to be injected in a minimally invasive manner in vivo. Here, fibrin microbeads containing human umbilical vein endothelial cells (HUVEC) and bone marrow-derived mesenchymal stromal cells (MSC) were cultured in suspension for 3 days (D3 PC microbeads) before being implanted within intramuscular pockets in a SCID mouse model of hindlimb ischemia. By 14 days post-surgery, animals treated with D3 PC microbeads showed increased macroscopic reperfusion of ischemic foot pads and improved limb salvage compared to the cellular controls. Delivery of HUVEC and MSC via microbeads led to the formation of extensive microvascular networks throughout the implants. Engineered vessels of human origins showed evidence of inosculation with host vasculature, as indicated by erythrocytes present in hCD31+ vessels. Over time, the total number of human-derived vessels within the implant region decreased as networks remodeled and an increase in mature, pericyte-supported vascular structures was observed. Our findings highlight the potential therapeutic benefit of developing modular, prevascularized microbeads as a minimally invasive therapeutic for treating ischemic tissues.

Interplay of fibrinogen αEC globular domains and factor XIIIa cross-linking dictates the extensibility and strain stiffening of fibrin networks.

BACKGROUND: Fibrinogen is a plasma protein forming the fibrin scaffold of blood clots. Its mechanical properties therefore affect the risk of bleeding as well as thrombosis. There has been much recent interest in the biophysical mechanisms controlling fibrin mechanics; however, the role of molecular heterogeneity of the circulating fibrinogen in determining clot mechanical function remains poorly characterized. OBJECTIVES: By comparing 2 fibrinogen variants where the only difference is the Aα-chain length, with one variant having a globular domain at its C-terminus, this study aimed to reveal how the molecular structure impacts the structure and mechanics of fibrin networks. METHODS: We characterized the mechanical response to large shear for networks formed from 2 recombinant fibrinogen variants: the most prevalent variant in circulation with a molecular weight of 340 kDa (recombinant human fibrinogen [rFib] 340) and a minor variant with a molecular weight of 420 kDa (rFib420). RESULTS: We show that the elastic properties of the 2 variants are identical when fibrin is cross-linked with factor XIIIa but differ strongly in its absence. Uncross-linked rFib420 networks are softer and up to 3-fold more extensible than rFib340 networks. Electron microscopy imaging showed that the 2 variants formed networks with a comparable structure, except at 4 mg/mL, where rFib420 formed denser networks. CONCLUSION: We propose that the αEC domains of rFib420 increase the extensibility of uncross-linked fibrin networks by promoting protofibril sliding, which is blocked by FXIIIa cross-linking. Our findings can help explain the functional role of different circulating fibrinogen variants in blood clot mechanics and tissue repair.

Wound-triggered shape change microgels for the development of enhanced biomimetic function platelet-like particles.

Platelets play a pivotal role in hemostasis and wound healing and conditional shape change is an important component of platelet functionality. In normal circumstances, platelets travel through the circulatory system in an inactive rounded state, which enables platelets to easily move to vessel walls for attachment. When an injury occurs, platelets are prompted by molecules, such as thrombin, to shift into a stellate shape and increase exposure of fibrin-binding receptors. When active, platelets promote hemostasis and clot retraction, which enhances clot stability and promotes healing. However, in conditions where platelets are depleted or hyporeactive, these functions are diminished and lead to inhibited hemostasis and healing. To treat platelet depletion, our group developed platelet-like particles (PLPs) which consist of highly deformable microgels coupled to fibrin binding motif. However, first generation PLPs do not exhibit wound-triggered shape change like native platelets. Thus, the objective of these studies was to develop a PLP formulation that changes shape when prompted by thrombin. To create thrombin-sensitive PLPs (TS-PLPs), we incorporated a thrombin-cleavable peptide into the microgel body and then evaluated PLP properties before and after exposure to thrombin including morphology, size, and in vitro clot retraction. Once thrombin-prompted shape change ability was confirmed, the TS-PLPs were tested in vivo for hemostatic ability and subsequent wound healing outcomes in a murine liver trauma model. We found that TS-PLPs exhibit a wound-triggered shape change, induce significant clot retraction following exposure to thrombin and promote hemostasis and healing in vivo after trauma.

Vascularization of PEGylated fibrin hydrogels increases the proliferation of human iPSC-cardiomyocytes.

Studies have long sought to develop engineered heart tissue for the surgical correction of structural heart defects, as well as other applications and vascularization of this tissue has presented a challenge. Recent studies suggest that vascular cells and a vascular network may have regenerative effects on implanted cardiomyocytes (CM) and nearby heart tissue separate from perfusion of oxygen and nutrients. The goal of this study was to test whether vascular cells or a formed vascular network in a fibrin-based hydrogel would alter the proliferation of human iPSC-derived CM. First, vascular network formation in a slowly degrading PEGylated fibrin hydrogel was optimized by altering the cell ratio of human umbilical vein endothelial cells to human dermal fibroblasts, the inclusion of growth factors, and the total cell concentration. An endothelial to fibroblast ratio of 5:1 and a total cell concentration of 1.1 × 106 cells/mL without additional growth factors generated robust vascular networks while minimizing the number of cells required. Using this optimized system, human iPSC-derived CM were cultured on hydrogels without vascular cells, hydrogels with unorganized encapsulated vascular cells, or hydrogels with encapsulated vascular cells organized into networks for 7 days. CM proliferation and gene expression were assayed following 7 days of culture on the hydrogels. The presence of vascular cells in the hydrogel, whether unorganized or in vascular networks, significantly increased CM proliferation compared to an acellular hydrogel. Hydrogels with unorganized vascular cells resulted in lower CM maturity evidenced by decreased expression of cardiac troponin t (TNNT2), myosin light chain 7, and phospholamban compared to hydrogels without vascular cells and hydrogels with vascular networks. Altogether, this study details a robust method of forming rudimentary vascular networks in a fibrin-based hydrogel and shows that a hydrogel containing endothelial cells and fibroblasts can induce proliferation in adjacent CM, and these cells do not hinder CM gene expression when organized into a vascular network.

Composition of thrombi in zebrafish: similarities and distinctions with mammals.

BACKGROUND: Blood clots are primarily composed of red blood cells (RBCs), platelets/thrombocytes, and fibrin. Despite the similarities observed between mammals and zebrafish, the composition of fish thrombi is not as well known. OBJECTIVES: To analyze the formation of zebrafish blood clots ex vivo and arterial and venous thrombi in vivo. METHODS: Transgenic zebrafish lines and laser-mediated endothelial injury were used to determine the relative ratio of RBCs and thrombocytes in clots. Scanning electron and confocal microscopy provided high-resolution images of the structure of adult and larval clots. Adult and larval thrombocyte spreading on fibrinogen was evaluated ex vivo. RESULTS: RBCs were present in arterial and venous thrombi, making up the majority of cells in both circulations. However, bloodless mutant fish demonstrated that fibrin clots can form in vivo in the absence of blood cells. Scanning electron and confocal microscopy showed that larval and adult zebrafish thrombi and mammalian thrombi look surprisingly similar externally and internally, even though the former have nucleated RBCs and thrombocytes. Although adult thrombocytes spread on fibrinogen, we found that larval cells do not fully activate without the addition of plasma from adult fish, suggesting a developmental deficiency of a plasma activating factor. Finally, mutants lacking αIIbß3 demonstrated that this integrin mediates thrombocyte spreading on fibrinogen. CONCLUSION: Our data showed strong conservation of arterial and venous and clot/thrombus formation across species, including developmental regulation of thrombocyte function. This correlation supports the possibility that mammals also do not absolutely require circulating cells to form fibrin clots in vivo.

Unveiling the Potent Fibrino(geno)lytic, Anticoagulant, and Antithrombotic Effects of Papain, a Cysteine Protease from Carica papaya Latex Using κ-Carrageenan Rat Tail Thrombosis Model.

While fibrinolytic enzymes and thrombolytic agents offer assistance in treating cardiovascular diseases, the existing options are associated with a range of adverse effects. In our previous research, we successfully identified ficin, a naturally occurring cysteine protease that possesses unique fibrin and fibrinogenolytic enzymes, making it suitable for both preventing and treating cardiovascular disorders linked to thrombosis. Papain is a prominent cysteine protease derived from the latex of Carica papaya. The potential role of papain in preventing fibrino(geno)lytic, anticoagulant, and antithrombotic activities has not yet been investigated. Therefore, we examined how papain influences fibrinogen and the process of blood coagulation. Papain is highly stable at pH 4-11 and 37-60 °C via azocasein assay. In addition, SDS gel separation electrophoresis, zymography, and fibrin plate assays were used to determine fibrinogen and fibrinolysis activity. Papain has a molecular weight of around 37 kDa, and is highly effective in degrading fibrin, with a molecular weight of over 75 kDa. Furthermore, papain-based hemostatic performance was confirmed in blood coagulation tests, a blood clot lysis assay, and a κ-carrageenan rat tail thrombosis model, highlighting its strong efficacy in blood coagulation. Papain shows dose-dependent blood clot lysis activity, cleaves fibrinogen chains of Aα, Bß, and γ-bands, and significantly extends prothrombin time (PT) and activated partial thromboplastin time (aPTT). Moreover, the mean length of the infarcted regions in the tails of Sprague-Dawley rats with κ-carrageenan was shorter in rats administered 10 U/kg of papain than in streptokinase-treated rats. Thus, papain, a cysteine protease, has distinct fibrin and fibrinogenolytic properties, suggesting its potential for preventing or treating cardiovascular issues and thrombosis-related diseases.

Development, comparative structural analysis, and first in vivo evaluation of acellular implanted highly compacted fibrin tubes for arterial bypass grafting.

The generation of small-caliber vascular grafts remains a significant challenge within the field of tissue engineering. In pursuit of this objective, fibrin has emerged as a promising scaffold material. However, its lack of biomechanical strength has limited its utility in the construction of tissue engineered vascular grafts. We have previously reported about the implementation of centrifugal casting molding to generate compacted fibrin tubes with a highly increased biomechanical strength. In this study, we conducted a structural analysis of compacted fibrin tubes using the open-source software Fiji/BoneJ. The primary aim was to validate the hypothesis that the compaction of fibrin leads to a more complex structure characterized by increased crosslinking of fibrin fibers. Structural analysis revealed a strong correlation between fibrin's structure and its biomechanical strength. Moreover, we enhanced fibrin compaction in a subsequent dehydration process, leading to a significant increase of biomechanical strength. Thus, the presented method in combination with an adequate imaging, e.g., micro-CT, has substantial potential as a powerful tool for quality assurance in the development of fibrin-based vascular grafts. To validate this concept, acellular highly compacted fibrin tubes were implanted as substitutes of a segment of the carotid artery in a sheep model (n = 4). After 6 months explanted segments exhibited distinct remodeling, transitioning into newly formed arteries.

A feasibility study transplanting macrophages to a segmental nerve injury.

INTRODUCTION/AIMS: Promoting regeneration after segmental nerve injury repair is a challenge, but improving angiogenesis could be beneficial. Macrophages facilitate regeneration after injury by promoting angiogenesis. Our aim in this study was to evaluate the feasibility and effects of transplanting exogenous macrophages to a segmental nerve injury. METHODS: Bone marrow-derived cells were harvested from donor mice and differentiated to macrophages (BMDM), then suspended within fibrin hydrogels to facilitate BMDM transplantation. BMDM survival was characterized in vitro. The effect of this BMDM fibrin hydrogel construct at a nerve injury site was assessed using a mouse sciatic nerve gap injury. Mice were equally distributed to "fibrin+Mφ" (fibrin hydrogels containing culture medium and BMDM) or "fibrin" hydrogel control (fibrin hydrogels containing culture medium alone) groups. Flow cytometry (n = 3/group/endpoint) and immunohistochemical analysis (n = 5/group/endpoint) of the nerve gap region were performed at days 3, 5, and 7 after repair. RESULTS: Incorporating macrophage colony-stimulating factor (M-CSF) improved BMDM survival and expansion. Transplanted BMDM survived for at least 7 days in a nerve gap (~40% retained at day 3 and ~15% retained at day 7). From transplantation, macrophage quantities within the nerve gap were elevated when comparing fibrin+Mφ with fibrin control (~25% vs. 3% at day 3 and ~14% vs. 6% at day 7). Endothelial cells increased by about fivefold within the nerve gap, and axonal extension into the nerve gap increased almost twofold for fibrin+Mφ compared with fibrin control. DISCUSSION: BMDM suspended within fibrin hydrogels at a nerve gap do not impair regeneration.

Biomechanics, Energetics, and Structural Basis of Rupture of Fibrin Networks.

Fibrin provides the main structural integrity and mechanical strength to blood clots. Failure of fibrin clots can result in life-threating complications, such as stroke or pulmonary embolism. The dependence of rupture resistance of fibrin networks (uncracked and cracked) on fibrin(ogen) concentrations in the (patho)physiological 1-5 g L-1 range is explored by performing the ultrastructural studies and theoretical analysis of the experimental stress-strain profiles available from mechanical tensile loading assays. Fibrin fibers in the uncracked network stretched evenly, whereas, in the cracked network, fibers around the crack tip showed greater deformation. Unlike fibrin fibers in cracked networks formed at the lower 1-2.7 g L-1 fibrinogen concentrations, fibers formed at the higher 2.7-5 g L-1 concentrations align and stretch simultaneously. Cracked fibrin networks formed in higher fibrinogen solutions are tougher yet less extensible. Statistical modeling revealed that the characteristic strain for fiber alignment, crack size, and fracture toughness of fibrin networks control their rupture resistance. The results obtained provide a structural and biomechanical basis to quantitatively understand the material properties of blood plasma clots and to illuminate the mechanisms of their rupture.

Fibrinogen and fibrin: synthesis, structure, and function in health and disease.

Fibrinogen is an extraordinary molecule by any estimation. It is large, structurally intricate, and circulates at high concentrations. Its biological end product, insoluble fibrin(ogen) or fibrin, can assume a diverse array of conformations with the ability to interact with numerous plasma proteins and cells and withstand biochemical and biomechanical disruption to facilitate wound healing. Quantitative and qualitative defects in fibrinogen or fibrin are associated with bleeding, thrombosis, inflammation, and diseases affected by these processes. Numerous studies investigating mechanisms by which fibrin(ogen) and fibrin contribute to health and disease have been published. This review for the 20th-anniversary series in the Journal of Thrombosis and Haemostasis summarizes interesting aspects of fibrin(ogen) biology, biochemistry, biophysics, and physiology and highlights exciting findings published in the past 2 decades.

Fibrin Adsorption on Cardiovascular Biomaterials and Medical Devices.

Medical devices that are inserted in blood vessels always risk eliciting thrombosis, and the surface properties of such devices are thus of major importance. The initiating step for surface-induced pathological coagulation has been associated with adsorption of fibrinogen protein on biomaterial surfaces and subsequent polymerization into an insoluble fibrin clot. This issue gives rise to an inherent challenge in biomaterial design as varied surface materials must fulfill specialized roles while also minimizing thrombotic complications from spontaneous fibrin(ogen) recruitment. We have aimed to characterize the thrombogenic properties of state-of-the-art cardiovascular biomaterials and medical devices by quantifying the relative surface-dependent adsorption and formation of fibrin followed by analysis of the resulting morphologies. We identified stainless steel and amorphous fluoropolymer as comparatively preferable biomaterials based on their low fibrin(ogen) recruitment, in comparison to other metallic and polymeric biomaterials, respectively. In addition, we observed a morphological trend that fibrin forms fiber structures on metallic surfaces and fractal branched structures on polymeric surfaces. Finally, we used vascular guidewires as clotting substrates and found that fibrin adsorption depends on parts of the guidewire that are exposed, and we correlated the morphologies on uncoated guidewires with those formed on raw stainless-steel biomaterials.

Cellular composition modifies the biological properties and stability of platelet rich plasma membranes for tissue engineering.

Scaffolds should provide structural support for tissue regeneration, allowing their gradual biodegradation and interacting with cells and bioactive molecules to promote remodeling. Thus, the scaffold's intrinsic properties affect cellular processes involved in tissue regeneration, including migration, proliferation, differentiation, and protein synthesis. In this sense, due to its biological effect and clinical potential, Platelet Rich Plasma (PRP) fibrin could be considered a successful scaffold. Given the high variability in commercial PRPs formulations, this research focused on assessing the influence of cellular composition on fibrin membrane stability and remodeling cell activity. The stability and biological effect were evaluated at different time points via D-dimer, type I collagen and elastase quantification in culture media conditioned by Plasma Rich in Growth Factors - Fraction 1 (PRGF-F1), Plasma Rich in Growth Factors - Whole Plasma (PRGF-WP) and Leukocyte-rich Platelet Rich Plasma (L-PRP) membranes, and by gingival fibroblast cells seeded on them, respectively. Ultrastructure of PRP membranes was also evaluated. Histological analyses were performed after 5 and 18 days. Additionally, the effect of fibrin membranes on cell proliferation was determined. According to the results, L-PRP fibrin membranes degradation was complete at the end of the study, while PRGF membranes remained practically unchanged. Considering fibroblast behavior, PRGF membranes, in contrast to L-PRP ones, promoted extracellular matrix biosynthesis at the same time as fibrinolysis and enhanced cell proliferation. In conclusion, leukocytes in PRP fibrin membranes drastically reduce scaffold stability and induce behavioral changes in fibroblasts by reducing their proliferation rate and remodeling ability.

Fibrin clots from patients with acute-on-chronic liver failure are weaker than those from healthy individuals and patients with sepsis without underlying liver disease.

BACKGROUND: Previous studies identified decreased clot permeability, without differences in fibrin fiber density in clots, from patients with cirrhosis compared with those from healthy controls (HCs). Fibrinogen hypersialylation could be the reason for this discrepancy. OBJECTIVES: The aim of this work was to study mechanical properties of clots and reassess clot permeability in relation to hypersialylation in patients with stable cirrhosis, acute decompensation, and acute-on-chronic liver failure (ACLF). Sepsis patients without liver disease were included to distinguish between liver-specific and inflammation-driven phenotypes. METHODS: Pooled plasma was used for rheology and permeability experiments. Permeability was assessed with compression using a rheometer and by liquid permeation. Purified fibrinogen treated with neuraminidase was used to study the effects of fibrinogen hypersialylation on liquid permeation. RESULTS: Mechanical properties of clots from patients with stable cirrhosis and acute decompensation were similar to those of clots from HCs, but clots from patients with ACLF were softer and ruptured at lower shear stress. Clots from sepsis patients without liver disease were stiffer than those from the other groups, but this effect disappeared after adjusting for increased plasma fibrinogen concentrations. Permeability was similar between clots under compression from HCs and clots under compression from patients but decreased with increasing disease severity in liquid permeation. Removal of fibrinogen sialic acid residues increased permeability more in patients than in controls. CONCLUSION: Clots from patients with ACLF have weak mechanical properties despite unaltered fibrin fiber density. Previous liquid permeation experiments may have erroneously concluded that clots from patients with ACLF are prothrombotic as fibrinogen hypersialylation leads to underestimation of clot permeability in this setting, presumably due to enhanced water retention.

An in vitro analysis of the hemostatic efficacy of fibrinogen precipitation with varied keratin fraction compositions.

In preclinical studies, human hair has demonstrated effective hemostatic properties, potentially attributed to keratin proteins facilitating rapid conversion of fibrinogen to fibrin during coagulation. However, the rational use of human hair keratin for hemostasis remains unclear, given its complex mixture of proteins with diverse molecular weights and structures, leading to variable hemostatic capacity. To optimize the rational utilization of human hair keratin for hemostasis, we investigated the effects of different keratin fractions on keratin-mediated fibrinogen precipitation using a fibrin generation assay. Our study focused on high molecular weight keratin intermediate filaments (KIFs) and lower molecular weight keratin-associated proteins (KAPs) combined in various ratios during the fibrin generation. Scanning electron microscope analysis of the precipitates revealed a filamentous pattern with a broad distribution of fiber diameters, likely due to the diversity of keratin mixtures involved. An equal proportion of KIFs and KAPs in the mixture yielded the most extensive precipitation of soluble fibrinogen in an in vitro study, potentially due to structure-induced exposure of active sites. However, all hair protein samples exhibited diverse catalytic behaviors compared to thrombin, highlighting the potential of utilizing specific hair fractions to develop hair protein-based hemostatic materials with optimized capacity.

Protocol for the Investigation of Plasma and Whole Blood Clot Property of Fibrin Fiber Thickness Using Scanning Electron Microscopy.

Blood clot formation represents a key component of the coagulation process for preventing excessive hemorrhage. The structural characteristics of blood clots are associated with their strength and susceptibility to fibrinolysis. Scanning electron microscopy is a technique that allows for state-of-the-art image capture of blood clots, providing visualization of topography, fibrin thickness, fibrin network density, and blood cell involvement and morphology. In this chapter, we provide a detailed protocol for characterization of plasma and whole blood clot structure using SEM, covering the spectrum from blood collection, in vitro clot formation, sample preparation for SEM, imaging, and image analysis, specifically focusing on the measurement of fibrin fiber thickness.

Towards understanding the effect of fibrinogen interactions on fibrin gel structure.

Fibrin gelation involves the enzymatic conversion of the plasma protein fibrinogen to fibrin monomers which then polymerize to form the gel that is a major structural component of a blood clot. Because fibrinogen provides the material from which fibrin is made, it is generally regarded as promoting the gelation process. However, fibrinogen can bind to a site on a fibrin oligomer, preventing another fibrin oligomer from binding there, thus slowing the polymerization process. "Soluble fibrin oligomers," which are mixtures of fibrin and fibrinogen, are found in the blood plasma and serve as biomarkers for various clotting disorders, so understanding the interplay between fibrin and fibrinogen during fibrin polymerization may have medical importance. We present a kinetic gelation model of fibrin polymerization which accounts for the dual and antagonistic roles of fibrinogen. It builds on our earlier model of fibrin polymerization that proposed a novel mechanism for branch formation, which is a necessary component of gelation. This previous model captured salient experimental observations regarding the determinants of the structure of the gel, but did not include fibrinogen binding. Here, we add to that model reactions between fibrinogen and fibrin, so oligomers are now mixtures of fibrin and fibrinogen, and characterizing their dynamics leads to equations of substantially greater complexity than previously. Using a moment generating function approach, we derive a closed system of moment equations and we track their dynamics until the finite time blow-up of specific second moments indicates that a gel has formed. In simulations begun with an initial mixture of fibrin and fibrinogen monomers, a sufficiently high relative concentration of fibrinogen prevents gelation; the critical concentration increases with the branch formation rate. In simulations begun with only fibrinogen monomers that are converted to fibrin at a specified rate, the rates of conversion, fibrinogen binding to oligomers, and branch formation together determine whether a gel forms, how long it takes to form, and the structural properties of the gel that results.